Actisense USG-2 NMEA 0183 to USB Serial Gateway
Estimated Delivery 7 - 14 days
RRP £132.04
The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network. The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.
- NMEA 0183 RS422 & RS232 compatible
- ISO-Drive technology
- Pluggable screwless connector with locking latch & strain relief
- Encapsulated electronics
- High retention USB socket
- Diagnostic & power LEDs
- Baud rates from 300 to 230400 bps
- Bulkhead mount with optional DIN rail mount kit
- Pluggable screwless connector
The USG-2 provides a far safer connection when compared to standard USB to serial converters. Electrical isolation is provided by the ISO-Drive output and OPTO-isolated input making installation simple and free from ground loops.
The input uses the Actisense OPTO-isolation circuitry to protect any connected equipment from the most common system faults. The input can receive very low-level signals that are often too small to be received by a PC serial port.
The USG-2 is the safest way to connect a boat's data network to an on-board PC.
Note: The USG-2 ships with a USB cable included in the box. However the USG-2 cable is also available as an accessory in case a replacement is needed.
BENEFITS
- Inputs & outputs protected against over voltage ESD & short circuits
- Simple installation
- Protects PC from damage
- Eliminates ground loops
-
C-Map® Discover - Pemba To Mogadishu£134.38 £111.98 -
-
-
-
-
-
-
Navico NSX 3012 Sun Cover£81.26 £67.72 -
-
-
