Maretron Pressure Transducer 0 to 3 PSI
£149.44
£124.53
Available to order
Estimated Delivery 7 - 14 days
Estimated Delivery 7 - 14 days
MPN
PT-0-3PSI-01
Pressure transducer 0 to 3 PSI or tank depth up to 83" of water Accessory for the FMP100
All Maretron pressure transducer assemblies are equipped with a ¼” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 133 to 177 in-lbs (15 to 20 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.
We found other products you might like!
-
Raymarine CPT-S Plastic CHIRP Thru Hull Transducer - 0° Element£150.32 £125.27
-
Raymarine B164-20 50/200 kHz DT Bronze Low Profile Transducer£1,052.07 £876.72
-
Raymarine CPT-S Bronze CHIRP Sonar Transducer - 12° Element£200.60 £167.17
-
Raymarine RealVision 3D Split Transducer Y Cable£79.45 £66.21
-
Garmin GT12M-THF 20° Tilt 8 Pin Bronze Thru-Hull Transducer£429.98 £358.32
-
Raymarine Axiom 7DV & CPT-S Transom Mount Transducer£724.95 £604.12