Garmin Airmar R111LH In-hull 2KW Transducer
Estimated Delivery 7 - 14 days
Free mainland UK delivery!
This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to the Garmin Marine Network via a compatible sonar, such as the GSD 26.
Note: In-hull installation not recommended for cored-hull vessels.
- Transducer Frequency: CHIRP Low: 38-75 kHz, CHIRP High: 130-210 kHz
- Transducer Power: 2 kW
- Transducer Beamwidth: 10° x 19° / 4° - 8°
- Transducer Max Depth: 6,000 ft.
- Cable Length: 49 ft.
- Records: Depth and Temperature
- Connector: None (Bare wires)
- Supported Deadrise Angles: 0° - 25° degree deadrise
This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to the Garmin Marine Network via a compatible sonar, such as the GSD 26.
Designed to allow both traditional and Spread Spectrum scanning, this 2 kW barewire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging the boat.
-
Garmin Airmar B117 0° Tilt 8 Pin Bronze Thru-Hull Transducer£246.97 £205.81
-
Airmar M192 33B 200H 15M C44 NC Transducer£4,559.11 £3,799.26
-
Maretron Pressure Transducer Vacuum to 1 Bar£193.34 £161.12
-
Airmar B117 Bronze Depth Thru Hull transducer£246.73 £205.61
-
Airmar B60 Transducer Thru Hull 12 Tilt with 7m Cable Navico£449.54 £374.62
-
Garmin 8 Pin Transducer Extension Cable - 10ft (3m)£35.30 £29.42